This degree project aims at developing a concept for how to use solar energy to pump up water. The target audience is people living in areas where the functioning of the electricity and water network is absent. In these areas, the hand-powered water pump is the most common technology. The degree project's goal is to find an economically viable alternative to the time consuming hand-powered water pumps. The power comes from solar energy.

Steam was used as a site preparation method to eliminate unwanted bilberry (Vaccinium myrtillus L.) in the boreal forest. The efficiency of steam to suppress bilberry was compared with prescribed burning and cutting the bilberry. Different combinations of steaming and/or cutting the bilberry were set up to investigate in which way steaming and cutting influenced the sprouting and regrowth of bilberry. The regrowth of the bilberry vegetation was monitored for 40 month. Steam was most efficient in suppressing bilberry.

The purpose of the project was to exam steams ability to sterilize carrots infected withLactobacillus plantarum. The project was a cowork with Brämhults Juice AB. They hadobserved an increase of Lactobacillus in the production of carrot juice during the summer. Tokeep the flavour of fresh fruits, the juice is treated carefully with heat. This means that thejuice only stays fresh for a few days, around two weeks for an unopened package and threedays for an opened package.In an attempt to remove the remaining Lactobacillus of the carrots, steam is tested as an extrastep in the production of juice.

Aerated steam treatment is a modern and environmental friendly method for seed borne fungus sanitation, mainly used on cereals. The method involves exposure to heat and high humidity, factors which are known to induce a fast ageing of seeds, thus resulting in reduced storability. This thesis clarifies the interdependence between seed age and the aerated steam treatment intensities. Two studies were carried out in this thesis. In the first study the storage longevity of seeds treated with aerated steam was examined. The second study investigated the shelf-life of the pre-tests used to determine the aerated steam treatment tolerance of a seed lot, by testing the treatment tolerance of seeds aged prior to the treatment.

If a building is heated by a heat pump, it is of high importance that the heat pump has a high coefficient of performance. An exhaust air heat pump extracts heat from the building?s exhaust air. The air has a relatively high and constant temperature all year around, leading to a high seasonal coefficient of performance. This thesis examines whether it is profitable to complement an exhaust ventilation system with an exhaust air heat pump in an apartment block that already has geothermal heat pump, district heating, oil- or biofuel heated system.

Objective ? To study the requirement of nursing care of the equine patient during eye treatment with a lavage system together with a constant rate infusion pump. Procedures ? Three veterinary nurses at ATG: s Hästsjukhus in Skara were asked nine questions at individual interviews. Inclusion criteria for participation in the interview were that the nurse should have treated equines with and without the infusion pump to the lavage system, but also traditionally with eye drops. Results ? The equine had a higher well-being since it experienced less stress during eye treatment with the infusion pump compared to treatment given by hand through the lavage system. The treatment would be more effective with constant rate infusion and save costs for the owner.

Internet och sociala medier har lett till att användare har fått möjligheter att dela med sig av information som i sin tur får representera dem i de olika virtuella miljöerna. Bland annat finns Steam som är en spelplattform med möjlighet att skapa samt ändra användarprofiler. Men varför väljer aktiva användare av Steam som har ändrat sin användarprofil att ändra den?Efter en enkätundersökning med svar från 50 deltagande skapades en uppfattning om användares valmöjligheter samt användning av olika funktioner som tillät användare dela med sig av information om sig själva via Steam. Därefter anordnades semistrukturerade intervjuer där deltagares svar ledde till diskussion kring olika begrepp som skulle kunna förklara anledningar till användandet av funktionerna på användarprofilerna.Resultaten i denna studie visade att de olika begrepp som beskriver varför användare väljer att ändra sina profiler är virtuell identitet, anonymitet och socialt kapital.

The task was to design and manufacture a submersible displacement pump working with the wobble plate principle. The main task for the Wobble plate pump is to be used as a sewage pump for smaller households or dewatering pump in environments where small flows and high pressures are acquired. For these purposes ITT Flygt sell a screw pump, PC-Grinder 3068. The hydraulic part of the PC-Grinder is manufactured by a subcontractor. Therefore ITT Flygt wants to evaluate an alternative to their screwpump PC-Grinder, which can be entirely manufactured by them self.

This work is a product development of a product which facilitates enduro drivers swallowing fluid while driving. My own experience of the problem and a custom survey gave me some frames and requirements of how such a product would look. To obtain the different concepts the method of brainstorming was used where I outlined the various proposals. The basic concept was that some kind of pump would build pressure in the liquid and when the user opens the nozzle the liquid will come out without the need to use the mouth to suck. The screening phase consisted of two steps.

The demand for district heating is expected to decrease in the future, due to competition from heat pumps and energy efficiency measures in buildings. Development of existing district heating systems is therefore necessary for district heating companies to maintain market shares. This Master?s thesis describes and investigates the heat and electricity production and profitability of a combined Organic Rankine Cycle (ORC) and heat pump that is integrated with an existing district heating system. The studied district heating system is utilizing heat from waste incineration. In Sweden waste constitute 20 % of the fuel mix used in district heating systems, and this share is expected to increase in the future.

Vattenfall Heat Uppsala runs the waste incineration plant in Uppsala, which produces district heating, process steam, district cooling and electricity. Vattenfall Heat Uppsala has decided to introduce an energy management system with the aim to increase the energy efficiency of the plant. The basis in such a system is to make an energy mapping.In this thesis an energy mapping has been performed at the waste incineration plant with the aim to identify and determine the size of energy flows. The investigated energy flows are used fuel, produced and used steam, produced district heating and cooling. Also the use of electricity to run the processes has been investigated.

The actual project presents the development of a testing rig for a steam engine. A short overviewabout the development of steam engines is presented, until arriving to the development of thepresent engine, which will require to be tested in different ways.The testing rig studied on this project (based on a Lanchester engine) will be used to testdifferent materials and layouts for the group Piston-Cylinder.The engine is a high performance steam power engine, which is going to have a highpower/dimensions ratio, what will lead to require high performance components and materials.An introduction to the testing rig is presented, and the entire design project is done in order toreplace the disappeared documentation of the current testing rig, built on the 1970?s. Also somemodifications done in the original testing rig are presented, as well as some detected problemsand their possible solutions..

This report is the result of a thesis work in Integrated Product Development, regarding hygienic features in dishwashers and especially disinfection by the use of steam.The thesis is performed at Electrolux Primary Development Dishcare in Stockholm and in collaboration with the Department of Machine Design at the Royal Institute of Technology.The targets of the thesis are to prove the advantages of a technology suitable to implement as a hygienic feature inside a dishwasher and to realize a functional prototype of a differentiated hygienic feature that does not exist on the market today.The process followed to perform the thesis is the process defined for Electrolux Primary Development.The technology chosen for development is disinfection by heating the water on the surface of the dishware, by the use of steam.A number of tests on how steam behaves when injected into the dishwasher tub have been performed, providing the results that have been taken in consideration when designing the prototype.The prototype consists of a pipe system provided with nozzles to eject the steam into the upper parts of the dishwasher. Tests of the final prototype show that thermal disinfection of water in a dedicated area of the tub can be reached within 9 minutes. The operation requires 0,17 liters of water and consumes 0.2kWh..

This report summarize what have been done during the Master of Science Thesis that Klas Schjelderup has written for the company RANOTOR Utvecklings AB. The company is developing modern steam engines and this work should develop a machine to perform tests on a new type of piston seal that hopefully could be used in the future. The steam engines will be both volumetric and energy compact, around 1600hp/literof cylinder volume, and it will have a lot of practical applications.The new type of piston seal is hydrostatic lubricated which means that a fluid is separating two faces that normally is in contact. In this case pressurized water is used to separate the piston seal from the cylinder wall. RANOTOR have earlier formulated that at least the expander in the modern steam engine have to be oil-free, due to other components functionality in the closed water system.

This thesis work has been performed at the department of diagnosis and dependability at Volvo Car Company, Torslanda. The background of this project is based on interest in ascertaining how different factors possibly can affect a diagnosis method, which has been developed to find leaks in the fuel tank and evaporation system. According to the OBD II requirements leaks with an orifice diameter larger or equal to 0,5 mm, must be detected. The idea of the diagnosis method is to create an over pressure in the system with an air-pump. The current through the pump is measured and correlates to the power consumed by the pump.